Is your Pit Boss grill showing a blinking “IT” light and leaving you puzzled? That blinking icon isn’t just a random signal—it’s telling you something important about your smoker’s internal temperature probe.
When this light flashes, it usually means your meat probe isn’t working right, which can mess up your cooking and ruin your meal. But don’t worry—you’re not alone, and fixing it might be simpler than you think. You’ll discover why your Pit Boss “IT” light is blinking, what it means for your grill’s performance, and easy steps you can take to get your smoker back to perfect cooking temperatures.
Keep reading, because understanding this small warning could save your next barbecue from disaster.
Cause Of It Light Blinking
The blinking IT light on a Pit Boss grill signals a problem with the internal temperature probe. This warning means the grill is not getting correct temperature readings. Without accurate data, the grill cannot control heat properly.
Several issues can cause this blinking. Most problems relate to the meat probe itself or its connection to the grill. Other causes involve the grill’s software or firmware.
Faulty Meat Probe Connection
The most common cause is a loose or faulty connection of the meat probe. If the probe is not fully plugged in, the grill loses signal. Dirt, grease, or corrosion on the probe plug can also block the connection.
Make sure the probe is firmly seated in the port. Clean the connection points with a damp cloth to remove grease and debris. Check for any bent or damaged pins in the port.
Damaged Probe Or Wires
Physical damage to the meat probe or its wires can trigger the blinking IT light. Heat, bending, or sharp objects can break the wires inside the probe cable. This break stops the probe from sending correct readings.
Inspect the probe and cable for cuts, kinks, or exposed wires. Replace the probe if any damage appears. A new probe often resolves the blinking issue quickly.
Software Or Firmware Issues
Sometimes, the grill’s software or firmware causes false blinking signals. Outdated or corrupted firmware may misread the probe data. This leads to incorrect alerts even when the probe is fine.
Check the manufacturer’s website for firmware updates. Installing the latest firmware can fix bugs and improve grill performance. A reset or reboot of the grill’s system may also stop the blinking light.
Frequently Asked Questions
Why Is My Pit Boss Blinking It?
A blinking “iT” light on your Pit Boss signals a faulty or disconnected meat probe. Check the probe’s connection, clean it, inspect wires, or replace the probe to fix inaccurate temperature readings.
What Happens If My P Setting Is Too Low?
A too low P setting causes shorter pauses in heating cycles, leading to frequent cycling and uneven temperature control.
How Do You Reset A Pit Boss Pellet Smoker?
To reset a Pit Boss pellet smoker, turn it off, unplug the power, wait 5 minutes, then plug it back in and power on.
How Long Is The Shutdown Cycle On A Pit Boss?
The Pit Boss shutdown cycle lasts about 10 to 15 minutes. It safely cools the grill and prevents flare-ups. Always allow this cycle to complete before unplugging or moving the grill.
Why Is My Pit Boss It Light Blinking?
The blinking IT light means the meat temperature probe is not working right. It could be loose, dirty, or broken. Check the connection and clean or replace the probe if needed.
Conclusion
A blinking IT light on your Pit Boss shows a problem with the temperature probe. Check if the probe is plugged in tightly and clean it well. Look for any damage on the wire that connects the probe. Replace the probe if the blinking continues or the grill does not heat properly.
Following these simple steps can help fix the issue quickly. Keep your grill working smoothly and enjoy great cooking every time.
