When the BlendJet’s power button forms a complete blue circle, it is fully charged. However, when the circle turns purple (instead of blue) while blending or pulsing, it indicates that the battery is getting low.
The red and purple flashing lights mean that the battery is dead and it’s time to recharge. Additionally, you can get your BlendJet out of lock mode by shaking it or turning it upside down and flipping it back over while it’s on.
If your BlendJet is leaking from the bottom or not turning on, it may need to be charged for at least an hour. Remember not to charge your BlendJet when it’s wet.
Common Issues
If you own a BlendJet and are experiencing the red and purple blinking lights, you may be facing one of the following common issues:
Not Fully Charged
If the light around the power button on your BlendJet forms a complete blue circle, it means your device is fully charged. However, if the circle turns purple while blending or pulsing, it indicates that the battery is getting low. When the battery is completely dead, the circle will flash red and purple, signaling that it’s time to recharge your BlendJet. Make sure not to charge it when wet.
Not Enough Power
If your BlendJet won’t turn on and flashes red and purple when you press the power button, it means that the battery is insufficiently charged. To resolve this issue, try charging your BlendJet for at least an hour using a different USB charger if necessary.
Alignment
Proper alignment is crucial for the BlendJet to function correctly. Ensure that all parts, including the jar and lid, are aligned properly by following the manufacturer’s instructions. Pay attention to the arrows on the device and align them accordingly.
Object Stuck In The Blade
If you notice that your BlendJet is flashing red lights and the blades appear to be blocked, it means there is an object stuck in the blade assembly. Disconnect the device from power and remove the obstructing object carefully. Ensure the blades are free from any debris before using your BlendJet again.
Too Much In The Jar
Overfilling the jar beyond its capacity can cause the BlendJet to stop working and display blinking red lights. To avoid this issue, make sure you do not exceed the maximum fill capacity indicated by the manufacturer. This will prevent strain on the motor and ensure smooth blending results.
Filling The Jar
When filling the jar with ingredients, be mindful of the recommended proportion. Adding too much can overload the motor and cause the BlendJet to malfunction. Follow the manufacturer’s guidelines and ensure you are using the appropriate measurements for the ingredients you are blending.
If you encounter any of these common issues with your BlendJet, following the troubleshooting steps provided should help you resolve the problem and get back to enjoying delicious smoothies and blends in no time!
Troubleshooting Tips
Blendjet blinking red and purple indicates a low battery or blades blockage. Ensure a full recharge to resolve the issue and avoid running the device when wet. Troubleshooting tips include shaking or turning the Blendjet upside down to clear blockages and achieve optimal blending performance.
Charging
When the light forms a complete blue circle, the BlendJet is fully charged. A purple circle indicates low battery while a red and purple flashing light signifies dead battery.
Getting Blendjet Out Of Lock Mode
If your BlendJet is in lock mode, try shaking it or turning it upside down and back to unlock. For blinking red lights, recharge or check for blade blockages.
Dealing With Leaks
If your BlendJet is leaking from the bottom, ensure everything is properly sealed and check for any damages.
Battery Reset And Troubleshooting
If your BlendJet won’t turn on and flashes red and purple, it needs charging. Avoid charging when wet and use a different USB charger if needed.
User Experiences
The blinking red and purple lights on your Blendjet indicate that the battery is low and needs to be recharged. To fix this issue, make sure to fully charge your Blendjet and avoid using it when the battery is dead to prevent any damage.
Charging Challenges
Many BlendJet users faced difficulties with charging their portable blenders. The red and purple blinking lights indicating low battery or the need for a recharge often left users puzzled. Some encountered issues even after overnight charging, requiring alternative charging methods to reset the device.
Blendjet Users’ Perspectives
BlendJet customers expressed frustrations with the product as it displayed constant flashing lights, especially the purple light indicating low battery. Despite following the reset instructions, some users found the device unresponsive until using a different USB charger, highlighting potential compatibility issues.
Customer Service Insights
When it comes to customer service, BlendJet is dedicated to providing a seamless experience for their customers. With their helpful resources and responsive support team, resolving any issues with the BlendJet blender is effortless. Here are some key customer service insights:
Blendjet Help Center
The BlendJet Help Center is a valuable resource for troubleshooting and finding solutions to common issues. Whether it’s understanding the meaning behind blinking lights or resolving leaking problems, the Help Center has comprehensive articles to guide customers through the process. With step-by-step instructions and informative videos, customers can easily troubleshoot their BlendJet blender and get back to enjoying their smoothies.
Customer Testimonials
Customers who have reached out to the BlendJet customer service team have shared positive experiences and praise for the support they received. Here are a few testimonials from satisfied customers:
- “I had an issue with my BlendJet not turning on, and I pressed the power button only to see red and purple lights flashing. I immediately reached out to the customer service team, and they responded promptly with a solution. Charging my BlendJet for an hour resolved the issue, and I was back to blending my favorite smoothies!” – John
- “The BlendJet Help Center was a lifesaver when I encountered problems with my BlendJet leaking from the bottom. Their article on troubleshooting product issues provided me with the necessary steps to address the problem. The support team was also quick to respond to my additional queries, ensuring that I had a positive experience overall.” – Sarah
These testimonials highlight the effectiveness of BlendJet’s customer service, emphasizing their ability to promptly address and resolve customer concerns.
In conclusion, BlendJet’s commitment to customer satisfaction shines through their exceptional customer service efforts. With the BlendJet Help Center as a valuable resource and positive customer testimonials showcasing their dedication, customers can feel confident in their decision to choose BlendJet as their go-to portable blender.
Community Discussions
Blendjet Blinking Red And Purple has sparked a great deal of engagement within various online communities. Whether troubleshooting, sharing experiences, or seeking advice, individuals have taken to platforms such as Reddit and various social media channels to engage in meaningful discussions surrounding this topic. Let’s take a closer look at the interactions within these communities.
Reddit Engagements
On Reddit, individuals have openly shared their experiences and concerns regarding the Blendjet Blinking Red And Purple issue. Users have discussed methods to troubleshoot the blinking lights, exchanged tips on resolving the problem, and expressed their overall satisfaction or dissatisfaction with the product. These discussions have provided valuable insights and solutions for many Blendjet users.
Social Media Interactions
Across different social media platforms, users have actively interacted regarding Blendjet’s blinking red and purple lights. Whether through comments on official posts, sharing personal stories, or seeking assistance from the community, individuals have found a space to connect and address the challenges they’ve encountered with the product. These interactions have fostered a sense of community support and collective problem-solving.
Expert Opinions
When the light around the power button forms a complete blue circle, the BlendJet is fully charged. However, if it turns purple, the battery is low. When it flashes red and purple, it’s time to recharge. Need further assistance, visit BlendJet Help Center for troubleshooting tips.
Tech Reviews
If you’re experiencing the BlendJet blinking red and purple, fret not, as this issue is encountered by many users worldwide. The BlendJet, a popular portable blender, is revered for its convenience and compact design. However, when encountering technical glitches, it’s imperative to seek insights and solutions from various experts with diverse experiences.
Blendjet Partner Insights
BlendJet Partners have provided essential insights into the blinking red and purple issue, offering valuable troubleshooting tips to ensure a seamless blending experience for users. Their collaborative efforts contribute significantly to addressing the concerns of BlendJet users, establishing an essential resource for resolving technical problems.
When it comes to technical issues with devices like the BlendJet, it’s crucial to gather information from experts in the field. This allows users to gain diverse perspectives and insights on how to address the blinking red and purple problem effectively.
Frequently Asked Questions On Blendjet Blinking Red And Purple
Why Is My Blendjet Flashing Purple Then Red?
When the BlendJet flashes purple then red, it means the battery is low and needs charging.
How Do I Get My Blendjet Out Of Lock Mode?
To get your BlendJet out of lock mode, try shaking it or turning it upside down and then back over. This should reset the lock mode and allow you to use your BlendJet normally.
What Do The Blinking Lights On A Blendjet Mean?
The blinking lights on a BlendJet indicate its charging status and potential issues. A flashing red light means the device needs recharging. If the light is purple and red, it may indicate low battery or a blocked blade. Recharge the BlendJet or clear any obstructions to resolve the issue.
Why Is My Blendjet Leaking From The Bottom?
If your BlendJet is leaking from the bottom, it may be overfilled or not sealed properly.
Why Is My Blendjet Flashing Purple Then Red?
When the power button forms a complete blue circle, the battery is fully charged. Purple light indicates low battery, while red and purple flashing signals the need for recharging.
Conclusion
To conclude, if you find your Blendjet blinking red and purple, it indicates that the battery is getting low and needs to be recharged. Additionally, red flashing lights may also be a sign that the blades are blocked. In such cases, you can try shaking the Blendjet or turning it upside down to unclog the blades.
Remember, it is important to charge the Blendjet only when it’s dry. If you encounter any further issues, you can refer to Blendjet’s Help Center for troubleshooting assistance. Your Blendjet is designed to provide convenience and versatility, so enjoy blending your favorite ingredients with ease!
